This is the key point for intelligent lighting to enter the era of human-caused lighting.

Philips and Osram, and other giants have spent time in recent years, introduced a multiple networking lighting solutions, these solutions will be the decisive factor of development of home  LED lighting industry in the intelligence field continues to grow rapidly. there are two key factors in the first, the industry must have a standardized open and interoperable platform, can apply to most of the  lighting control; Second, manufacturers can not ignore the cost of from traditional to digital lighting, and possibly continue to improve the efficiency that has to be smartphones have & traditionally we use the switch sensor and wall controller to control the lighting, however, people want more and more anytime and anywhere via smartphones to monitor the state of the remote device and control.

The importance of smartphone control:

As time goes on, the importance of smartphones and other mobile devices will no doubt increase the technology has become the control center of our daily life, enables us to work on the trip, and our social life through social media management & lighting has become another part of our life, can be controlled via mobile devices

How does a smartphone connect to lighting?

here are three different layers of connectivity (C1,C2, and C3) that define how smartphones connect to lighting. Each layer of the explanation is primarily based on low-power bluetooth (BLE) technology because of its huge potential and wide acceptance across the industry.

A lot of companies in this modern age make use of Radio Frequency Identification (RFID). RFID is the use of radio waves to capture information stored on a tag or card attached to an object which could be doors, safe locks etc. When the tag comes inside a few feet of the reader’s antenna, the RFID chip communicates its data, recognizing the operator to a security workstation. RFID tags are programmable and not hard to operate, also they are quite reasonably priced. Guesthouses, residence, hotels and other commercial structures are safer with the use of RFID.

It is essential to function with maximum security methods if you want to run a hotel industry without the danger of stealing which could scare a lodger from wanting to use your hotel. There are many hotel locking systems that may well thwart illicit actions or at least moderate it drastically. Even though keys have all the time being a general choice, automatic tags are becoming more and more attractive to hotels as they are worth the price they go for and also they deliver further safety measures. 

http://www.betechlock.com/be-tech-rfid-hotel-locking-system.html

I don’t know how much is “Cheap” for you. The turbos from China is cheap enough, and the quality is not so bad as someone said. I’ve bought a turbo with Max Speeding Rods brand for 270￡. It’s high performance turbo, not OEM. Maybe the OEM turbo will be cheaper than my price.

It’s expensive if you buy a new genuine turbocharger, but you could rebuild your failed turbocharger just to replace the old parts inside with new repair kit. It’s easy to get the repair kit from eBay or other online websites. It will save you a lot. And other solution is to install an aftermarket turbocharger. As I know, there are many turbo parts dealers in Europe import aftermarket turbocharger from China. Someone will say that the turbocharger from China is cheap and bad quality. It’s cheaper than genuine, but the turbochargers work perfectly.

At present, domestic car companies use turbocharged engines in large quantities except for Japanese. The biggest difference between a turbocharged engine and a naturally aspirated engine is the addition of a turbocharger assembly.

Many riders expressed concern about the life of the turbocharger. At present, most car companies have said that their life expectancy is basically equivalent to the whole vehicle.

For the time being, whether it is easy or not, let’s first see if the turbocharger is broken, how much does it cost to change one? There have been various sayings before, and it is said that Volkswagen’s turbocharger is 20,000 yuan. It is also said that BYD’s turbine is 7,000 yuan. In the end, the price of spare parts, the author made a small investigation in a treasure.

This survey only covers the spare parts price of the turbocharger assembly, and it is the price of the non-4S shop. The turbine price plus the working hour fee is the price of a non-4S shop repair.

It can be seen that the cheapest is the Great Wall 1.5T’s heavy-duty turbine, which only needs 2,500 yuan. The most expensive is the Buick Regal and LaCrosse turbine, which needs more than 6,700 yuan.

In the discussions with different customers in the past few years, I always got such questions from them about the price, discount of our product, uv flatbed printer. And they all very surprised that when the other uv printer suppliers offer discount, further discount, further… after the first quote. And they’ll even give more and more spare parts of the machine. The customer said, “You guy are doing business not in the Chinese style. I need discount.” That’s correct. This is the Nuocai style of business and I’ll explain why below. We also understand that most of the China suppliers, not only the uv printer suppliers, but also the ones in other fields, will quote a higher price in the beginning and wait for negotiation with the customer, one round, two rounds… till settle down the order. This is the Chinese business style that you mentioned. Of course that the price is the very important factor be to taken into consideration when you make decision which machine you should choose, however, what the meaning of the waste so much time just for the negotiation of the price that the supplier quote you. Shouldn’t we focus more on the machine itself? The design details, the stability, the printing quality of the machine? http://gznuocai.com/why-your-uv-printer-price-non-negotiable.html

_{While choosing dining furniture for your home is no mean feat, it becomes a whole new ball game when you’re looking for cafe furniture that defines your cafe and sets the mood. Getting your furniture right is important if you’re to create a warm and welcoming ambience for customers which also complements your food. So, let’s jump in and take a look at 4 tips to help you choose wisely:}

_{Don’t lose focus}

_{One of the things we’ve noticed about some cafes is that their interiors look muddled with mismatched furniture and accessories that give a confusing message. A good idea is to sit down and map out the furniture and decorative items that you require before you go looking for them. Settle on an overall aesthetic that you’re trying to create and then put together a palette of colours, materials, and patterns that fit within it. Stick to mostly neutral colours varying textures and patterns, limiting yourself to one or two colours for the bulk of your furniture with a bold colour used sparingly as an accent colour.}

_{Know your customers}

_{The key to a successful cafe is knowing your demographic and understanding their needs. Would your clientele be concerned about seat cushions and table heights? Would they appreciate a few tub chairs or sofas for added relaxation? Have you space to accommodate high chairs for children and/or booster seats?}

_{Choose quality over quantity}

_{Although it can be tempting to buy dining furniture intended for the home because it’s often cheaper, this can be false economy. Cafe furniture needs to withstand constant and regular use rather than occasional use, which is why commercial furniture should always be your first choice. Don’t be swayed too much by price either. Cheap doesn’t always mean the quality is inferior. Take our AFDR tested furniture for example. Some of our cheapest items have passed this test with flying colours. Always test out the furniture for yourself, after all if you don’t find it comfortable and sturdy, why will your customers?} 

_{Have fun}

_{While it’s important that you focus on your goal aesthetic and about creating the right mood, it’s also important to have fun when designing or revamping your cafe. What customers like most about cafes is when they’re teeming with personality and character. So put a little bit of yourself in the design and make it yours. After all, if you’re going to be working your socks off for years to come, you want to enjoy where you’re working!}  We CDG is a cafe table factory  main in metal commercial dining furniture, metal dininh chair, dining table,bar chair, stool,bar table. Should more information you want to know, please be freely contact http://www.cdgfurniture.com 

it is a luxury swim pool combination with massage. The tub has two independence parts, one part for swimming, another part is massage. It attracts a lot of attention in the Canton fair. http://monalisa.cn/swim-pool-spa.html

Everything has its own limitations, of course including the prefab container house. Every coin has two sides, but sometimes the limitations can be turned into the positive factor if you take it into close and thoughtful consideration. So for the prefabricated houses manufacturers, it is very useful to get to know the limitation of the prefab container house, maybe in the near future, the prefab container house can break through all the limitations and create a much better prefab steel home for the customers. 

Today, Linxin, as one of the prefab container house manufacturers in China, dedicating itself into prefab container house for decades, would like to share with you about the current limitation to manufacturing prefabricated houses, hopefully, it also help ourselves to achieve improvement sooner or later with the sincere advices and suggestions from all the customers.

As for the manufacturing prefab container house, the fire resistance is not enough. When the combustion temperature reaches 600 ℃, the steel structure will melt. Besides, the steel structure will get rusted easily, so it is very necessary to do a good measurement in preventing rust. 

In this regard, it’s highly recommended that the relevant supervisory bodies may follow up and inspect the construction process of the prefab container house, including the supervision and management of procurement projects, the evaluation, examination and selection of manufacturers, design reviews, typhoon prevention calculations and audits, Inspection and certification of raw materials and components, quality control of production process, pre-factory circuit and hydraulic testing, control of production schedule and delivery time, and inspection before delivery. In short, the construction of prefab container house should be carried out under the supervision of third parties to ensure their quality.

On the other hand, the main reason for the high housing price is that the land is expensive. If you buy a housing box, you should consider that you want to rent land in prefab container house, but what about the price? There are two kinds of prefab container house, one is the side board foam sandwich board, which is very weak, with a short service life, is not anti-theft. The use of traditional container modification, although it’s much better with an anti-theft effect, but the sound insulation effect is very poor, an interior decoration is very much needed. 

Prefab container house is used as a whole steel structure, so as for decoration, compared with ordinary house, it is more difficult, and causes a much higher decoration cost. Single prefab container house area is very small, if you use multiple prefab container house splicing, the waterproofing in the splicing area is poor, which needs to be maintained frequently. 

At present, domestic container paint is oil paint, which is more harmful to the human body. So we have to take all these limitations into consideration, and solving this problem for all the customers is a tough and long way for us, but it is our honor and pleasure to make it come true in the near future.

A turbocharger, colloquially known as a turbo, is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency and power output by forcing extra compressed airinto the combustion chamber.^[1][2] This improvement over a naturally aspirated engine‘s power output is due to the fact that the compressor can force more air—and proportionately more fuel—into the combustion chamber than atmospheric pressure (and for that matter, ram air intakes) alone.

A duturbo turbocharger is nothing but a centrifugal air compressor. Turbochargers are based on the principle of forced induction. It is the process of forcing compressed air into the intake for combustion.

PARTS OF Duturbo TURBOCHARGERS

DuturboTurbocharger consists of –

1) COMPRESSOR HOUSING

2) COMPRESSOR WHEEL

3) BEARING

4) OIL SEALS

5) SHAFT

6) TURBINE WHEEL

7) TURBINE HOUSING

The middle part whole part together is called a duturboturbocharger cartridge. The compressor wheel and the turbine wheel are connected with the shaft so that turning the turbine wheel will turn the compressor wheel. A turbocharger is designed to rotate over a hundred thousand rpm. An oil feed line from the engine will lubricate the shaft and the bearing provides less friction.

An engine without any forced induction device is a naturally aspirated engine. The air is pulled in through an air filter by the suction force of the piston. Then it gets mixed with the fuel, compressed and gets ignited. With a duturboturbocharger introduce, the exhaust gas from combustion turns the turbine wheel. This turns the compressor wheel and more air is compressed and fed to the engine. Now understand what is going in turbocharger, the exhaust gas from the engine will push the turbine wheel and this turns the compressor wheel forcing more air into the engine. According to Gas laws – “For a constant volume, increase in air pressure increases its temperature”, so there will be a difference in temperature after charging. Forcing this air into the engine can reduce efficiency and cause knocking. In order to cool this air, an inter cooler is introduced. An inter cooler is an air to air heat exchanger device which helps to cool this air before it enters the engine, so introducing an inter cooler into the system will increase the charge density by cooling the air and provides volumetric efficiency.

In conclusion, a duturbo turbocharger will provide more air to expand on combustion and produces more power. That’s how turbo charger works!

Digital printing machine refers to methods of printing from a digital-based image directly to a variety of media. It usually refers to professional printing where small-run jobs from desktop publishing and other digitalsources are printed using large-format and/or high-volume laser or inkjet printers.

Nuocai digital UV flatbed printer machine has served the customer for decades, with being experienced in uv printer for a long time, today Nuocai would like to share you with some insights about the advantage of a small uv flatbed printer especial for your business. The commercial uv flatbed is really a big heat nowadays on the market.
Firstly,small uv flatbed printer is a kind of high-tech uv digital printing machine, no matter how hard or how soft the surface of the material is, the small uv flatbed printer can have a fantastic performance in printing a colorful, delicate pattern or any pattern you can name it without a version padding, so this is a 100 percent un-touching process. Due to the factors above, the small uv flatbed printer is naturally introduced to the commercial use for your business and became a big heat on the market in a very short period.
Secondly, the competition leads to an even fast development in the uv digital printer, a lot of new high-tech is being adopted in this area. Nowadays,small uv flatbed printer makes a breakthrough to break the ceiling of the digital printing technology, during the printing process, it has no limits in the material. Wood, glass, crystal, pvc, abs, metal, plastic, stone, leather, clothing, paper, almost all kinds of material can be printed by the small uv flatbed printer. What’s more, no matter the printing pattern is an easy one or a complicated one, all of them can be printed in a one-time process without version padding and repeated coloring process.
The last but not the least, uv printer ink really matters, which contains a uv oil coating and plays an important role in the solidifying process. As you may know, after the solidifying process in a LED lightening condition, it will form an ink film which is the key element to decide the quality of the printing. So for commercial uv ink printer, all you need from them is to be rapid, efficient and flexible, you ‘d better choose a good ink for your uv ink printer and make your printing as commercial as it can.

Can luxury steam sauna room be used to lose weight? luxury steam sauna room has a lot of sauna benefits, and the most attractive one for us is that it help us lose weight. A growing number of people are using luxury steam sauna room to lose weight, but is going to a sauna room effective to lose weight?

luxury steam sauna room first appeared in the Netherlands. In China, it is customary to call it sauna steam bath. Many large hotels, restaurants and nursing homes are equipped with sauna kits, which becomes more and more popular among people.